Accessories

Thanks to various cable mounting devices, our SEC 15 and SEC 20 sensor cables are not only easy to mount, but also individually:

• Plastic or stainless steel fastening clips
• Cable ties for cable mounting
• Plastic dowels with galvanised or stainless steel screws
• Drilling and setting tools for fire protection dowels

You can get a quick and easy overview in the technical data for download.

For independent repair and connection work, we have put together a practical service case for you. The case is made of ABS plastic, has locks integrated in the frame as well as metal hinges and floor glides. Inside, you can expect a well thought-out subdivision, important tools such as cable shears, electronic side cutters or automatic wire strippers.

Our connection cable CC 15 can be combined with our sensor cable SEC 15 via the connection boxes CBO 15. In its function as a fire alarm cable it is halogen-free and thus has an improved behaviour in case of fire.

Our SEC 20 sensor cable can also be combined with individual ESA sensors in order to monitor specific sections more closely. We have summarised all technical details and special features for you to download as a PDF.

With a cable diameter of 6 mm and four cores with additional two-wire, our CC 20 connection cable can be used as a fire alarm cable up to a maximum operating voltage of 225 V AC.

Our lead-acid accumulator of the NP series is VdS approved and has a very good charging efficiency. The NP batteries can be operated permanently in almost any position. The plastic housing made of ABS is impact-resistant and break-proof. It is not necessary to refill the electrolyte. According to IATA, our 12 V accumulator is not a dangerous good.

The fanless design distinguishes our Ethernet switch FOC LAN just as much as its web interface. As an industrial switch suitable for DIN rail mounting, the following technical features speak for themselves:

• Power supply 24 V DC
• 6 x standard 10/100 Base TX, RJ45 ports
• 1 x RJ11 port
• 1 x pluggable 6-pole terminal block
• 2 x uplink port 100Base-FX, MM-SC (multi-mode device)
• 2 x uplink port 100Base-FX, SM-SC (single-mode device)
• Redundancy function HIPER ring (client / server)
• Diagnosis via LEDs, log file, signalling contact

Our end cap END is suitable for closing an open sensor cable end SEC 15 or SEC 20. For shrinking on using a hot air gun. The end cap is VdS approved according to EN 54-22, fulfils the response classes A1N, A2N and BN as well as the environmental group III, G 213072.

Our LIST hand crimping tool for 2- and 4-pole special connectors is compatible with our sensor cables SEC 15 and SEC 20.